loading

Thermal Paper Roll Sizes: How to Measure and Choose the Right Fit

Understand Width, Roll Diameter, Length and Core Size

Choose the right thermal paper roll by matching its dimensions to your printer and daily printing needs.

Quick Answer

Check paper width, roll outside diameter, paper length and core size before ordering. Start with your printer manual or the label on a suitable new roll. A roll that looks similar may still be too wide, too large for the compartment or unsuitable for the loading mechanism.

Read the units as well as the numbers. In a typical 80 × 80mm listing, the first number is paper width and the second is roll outside diameter. In 110mm × 30m, the second number is the total paper length. Always confirm the supplier’s dimension labels rather than assuming that every listing follows the same order.

Size example Paper width What the second number means
80 × 80mm 80mm 80mm roll outside diameter
110mm × 30m 110mm 30metres of paper length

The Four Key Roll Dimensions

Dimension What it means Why it matters
Paper width The width across the paper, parallel to the roll axis. Must match the printer’s supported media width.
Roll diameter
Outside diameter or OD
The distance across the circular end of the entire roll, from outer edge to outer edge through the centre. It is not the core diameter. Must stay within the paper compartment’s permitted diameter.
Roll length The total length of paper when unwound, usually stated in metres. Affects how many receipts, tickets or reports can be printed between changes.
Core size The dimensions of the tube in the centre. Inner diameter is the hole size; outer diameter includes the tube wall. Can affect mounting, roll rotation and how much paper fits within a given outside diameter.
2 (44)

Roll diameter alone does not tell you the paper length. At the same outside diameter, thinner paper generally allows more length when core size and winding conditions are the same. A larger core leaves less space for paper. Paper weight, expressed in gsm, means grams per square metre. It is not a direct thickness measurement. Confirm paper thickness separately when the finished diameter is important.

How to Choose the Right Roll

Measure Your Existing Roll

Measure paper width along the roll axis, from one paper edge to the other. Do not include a core that protrudes beyond the paper. For the outside diameter, place a ruler across the circular end through the centre. Measure the core opening separately; add the core outside diameter if your supplier or equipment specification requires it.

Use an unused roll when checking the original outside diameter. A partly used roll has already become smaller and cannot show the full size you need to reorder. Check the original pack label, invoice or supplier record for paper length instead of unwinding the whole roll to measure it.

1 (58)

Check Your Printer’s Requirements

Look up the exact printer or analyzer model. Confirm its supported paper width, maximum roll diameter, core requirements and loading method. Check which side must face the printhead and how the roll unwinds. If the equipment uses black marks for sensing, confirm their required position and dimensions as well.

Physical fit is only the first check. Paper grade and thickness must also suit the printer. After loading, the paper should feed, print and cut or tear as intended. Matching width alone does not establish compatibility.

4 (27)

Choose Roll Diameter and Length for Your Usage

An 80 × 70mm roll and an 80 × 80mm roll have the same nominal paper width but different outside diameters. With the same paper thickness, core and winding conditions, the 80mm diameter can hold more paper. It is useful only if the printer can accommodate it. Do not force a larger roll into a smaller compartment.

undefined

A 110mm × 30m roll contains 50% more paper length than a 110mm × 20m roll. When each report uses the same amount of paper, the longer roll can produce more reports between replacements. However, its finished diameter still needs to fit the pulmonary function analyzer. Do not assume that every analyzer accepting the 20m version will accept the 30m version.

Choose dimensions that fit the equipment first, then consider printing volume and the convenience of changing rolls. A larger diameter or longer roll is not automatically the better option.

Before Ordering

Order Checklist

Use the following details to make an enquiry. If a field is unknown, send the current pack label or a clear photo rather than guessing.

Item Information to provide
Printer model Brand and exact model number.
Paper width Required width in millimetres.
Roll diameter
Outside diameter
Diameter of a suitable unused roll, or the printer’s maximum permitted diameter, in millimetres.
Roll length Required metres per roll, or the current packaging specification.
Paper weight GSM Required grams per square metre, if specified. If unknown, provide a current paper sample or supplier specification.
Core inner diameter The core opening size in millimetres.
Core outer diameter The tube’s outside diameter, where required.
Winding requirements Coated-side orientation and unwinding direction, or a current-roll photo.
Special requirements Black marks or preprinted content, if needed.
Order quantity Expected number of rolls.
Packaging Rolls per pack and carton, neutral packaging or customer branding.

Sample Check

Load a sample according to the equipment manual. Check that the compartment closes normally and the roll can turn freely. Print several typical receipts, tickets or reports in succession, then check feeding, print clarity and cutting or tearing. Confirm the sample specification before placing the bulk order.

Storage and Handling

Keep unused rolls in their protective packaging until needed. Store them away from direct sunlight, heat and moisture. Avoid crushing or distorting the rolls, as damaged edges or an out-of-round roll can interfere with loading and feeding.

Frequently Asked Questions

Q: Can 57mm and 58mm paper rolls be used interchangeably?

Not automatically. These are nominal widths, and the printer’s accepted width and tolerance determine whether either roll is suitable. Check the exact model requirements and the supplier’s finished paper width before substituting one for the other.


Q: Why do rolls with the same outside diameter have different lengths?

Paper thickness, core outside diameter and winding condition affect how much paper fits into a roll. Compare the stated metres per roll as well as diameter and paper grade. GSM alone does not establish paper thickness or total length.


Q: Can a coreless roll replace a cored roll?

Only when the equipment supports that format. Some loading mechanisms depend on a core or spindle, while others allow a roll to sit freely in a compartment. Check the manual or confirm with the equipment supplier before changing formats.


Q: What if I cannot identify my current roll size?

Send the printer model, a photo of the original packaging and clear ruler photos showing paper width and the diameter of an unused roll. Include the core opening if possible. Kingcolor can help review the information and arrange a suitable sample for confirmation.

Find a Suitable Roll with Kingcolor

Our service starts with your equipment and how you use it. Kingcolor can help you review roll dimensions, paper options, core configuration and packaging, then use sample testing to confirm the choice for your application.

Send us your printer model or current roll details, and Kingcolor can help you identify a suitable specification.

prev
Carbonless Paper Guide
Three Proof Thermal Labels
next
Recommended for You
Get in Touch with Us
Shenzhen Kingcolor Paper Co.,Ltd.
Global Professional Thermal Printing Paper and Label Manufacturer
Customer service